Back to AEI website

Electrical & Electronics Engineer · Ozoro, Nigeria

George Otive Georgia

Designs and builds smart energy hardware for places with unreliable power: lithium battery systems, a smart distribution board that stops electrical fires, and IoT devices.

Founder & CEO, AEILead hardware and firmware engineerEngineering educator

GOG
Founder & CEO, AUTOTIVE Engineering & InnovationsOzoro, Delta State · Since 2019
2× London Represented Delta State at the NextGen Innovation Challenge Grand Finale, 2025 and 2026
26.7kWhof lithium battery storage built and delivered
8smart battery systems delivered
100+young people trained through AEI since 2019
70+SIWES students mentored, 30+ projects guided
Building now

SEMS, a smart distribution board that stops electrical fires, is in pilot. Certification is planned for 2027.

Visit AUTOTIVE
Recognized by NextGen Innovation Challenge Delta State Government Kestin Pondi Business Grant Vision to Venture Business Grant Southern Delta University (MOU)

What he has built

Hardware that solves real problems

George is founder and lead engineer on each product below, from circuit design and firmware to the apps. Each one answers a problem in Nigerian homes, schools and businesses.

Smart energyFounder, lead engineerLondon 2026

Smart Energy Management System (SEMS)

Problem
Electrical faults are a leading cause of fires in homes and offices, and people cannot see where their power goes.
Solution
A smart distribution board that monitors each circuit, isolates faulty circuits, and lets users track energy use and schedule appliances from an app, even offline over Bluetooth.
Impact
Field pilot running since July 2026. In September 2026 it caught an overvoltage from the mains supply. Top six in Delta State at the NextGen Innovation Challenge 2026, a London Grand Finale, and Top 10 of 661 at SMEDAN Zero to 100.
Energy storageFounder, lead engineer8 systems delivered

LiFePO4 Energy Storage Systems

Problem
Unreliable grid power, and batteries on the market with doubtful capacity and short lives.
Solution
12V and 24V lithium iron phosphate batteries with genuine cells and a smart BMS, sized to each customer's backup needs.
Impact
Eight battery systems, 26.7 kWh, delivered and running in homes, an office and a business in four towns across Delta State.
MeteringFounder, lead engineerPublished 2026

GSM Smart Prepaid Energy Meter

Problem
Prepaid meters depend on stable networks and vending centers that many communities, especially off grid ones, do not have.
Solution
A prepaid meter that works over the GSM mobile network, with remote top up, remote disconnect and tamper detection.
Impact
Field tests in Delta State measured accuracy within 2%. Published in Acta Scientific Artificial Intelligence, 2026.
IdentityFounder, lead engineerLondon 2025

Smart ID Management System

Problem
Schools and institutions still manage identity and attendance on paper, which is slow and hard to keep accurate.
Solution
An RFID identity management system that improves identification and access management.
Impact
Recognized among the best of over 3,000 innovations, top three in Delta State, and a place at the 2025 London Grand Finale.
Water₦1M grant

Smart Water Management System

Problem
Overhead tanks run dry or overflow, and pumps waste power when nobody is watching.
Solution
Smart monitoring and automation that tracks tank levels and controls the pump.
Impact
Won the ₦1 million Vision to Venture Business Grant in July 2026.

Also built: smart irrigation, gas leakage detection, IoT monitoring and control, solar PV performance monitoring, smart surveillance, and automated electrical switching.

Recognition

Awards and grants

National and international recognition for his innovations, and competitive funding that turned prototypes into products.

Moments of recognition

Delta State Government₦10 million support, December 2025
London 2026NextGen Grand Finale award
London 2025Receiving the NextGen Grand Finale award
Kestin Pondi grant₦5 million, 2025
Vision to Venture grant₦1 million, 2026
  1. 2026

    NextGen Innovation Challenge, Grand Finale, London

    SEMS placed among the top six innovations in Delta State. Represented Delta State in London and received a Grand Finale recognition award.

    Grand Finale award
  2. 2025

    NextGen Innovation Challenge, Grand Finale, London

    Smart ID recognized among the best of over 3,000 submissions and top three in Delta State. Received a Grand Finale recognition award.

    Grand Finale award
  3. 2026

    Vision to Venture Business Grant

    Funding for the Smart Water Management System, July 2026.

    ₦1 millionGrant
  4. 2025

    Delta State Government Support

    Support from the Delta State Government through the Ministry of Science and Technology, December 2025.

    ₦10 millionGovernment support
  5. 2025

    Kestin Pondi Business Grant

    One of 40 beneficiaries. Funding for energy storage development.

    ₦5 millionGrant
  6. 2025

    Memorandum of Understanding

    With the Department of Mechatronics Engineering, Southern Delta University, for training, research and knowledge transfer.

    Collaboration
  7. 2022

    Most Creative Student

    Electrical/Electronics Engineering Department, Delta State Polytechnic, Ozoro.

    Award

His story

From leaving Physics to London, twice

He did not take a straight road into engineering. He built it himself, one component at a time.

George first studied Physics at Delta State University, Abraka. His grades were poor, and in 2016 he made a hard choice. He left at 300 level to start again.

That same year he began teaching himself electronics. He learned the basics at Abraka, spent his upkeep money on components, and studied YouTube videos and circuit diagrams.

In 2017 he entered Delta State Polytechnic, Ozoro, this time to study what he loved. He earned his OND with Upper Credit in 2019. That year he founded AUTOTIVE Engineering & Innovations and joined Pin-Tech Automations, where he worked as a technician and trained industrial trainees until 2021.

For years he ran his lab from his sitting room. He finished his HND with Upper Credit in 2022 and was named Most Creative Student in his department. In 2025, the Kestin Pondi Business Grant let him equip AEI with precision tools. In December 2025, the Delta State Government supported his work with ₦10 million through the Ministry of Science and Technology.

Since then his innovations have taken Delta State to the London Grand Finale two years running. In 2026 he completed his B.Eng with Second Class Upper. Today he trains the young people who now stand where he once stood.

  1. 2016Leaves Physics at 300 level and starts teaching himself electronics
  2. 2017Enters Delta State Polytechnic, Ozoro
  3. 2019OND, Upper Credit. Founds AEI
  4. 2022HND, Upper Credit. Most Creative Student
  5. 2025Kestin Pondi grant. First London Grand Finale. ₦10M Delta State support
  6. 2026B.Eng, Second Class Upper. Second London Grand Finale

Training and mentorship

Skills that lead to jobs

George works to improve practical engineering education. His trainees build and test real hardware.

100+young people trained since 2019
70+SIWES students mentored
30+undergraduate projects guided
150+trained in solar with SALIMO-WITS
  • Resource person for SWEP at Southern Delta University in 2024, 2025 and 2026.
  • Training areas: electronics, embedded systems, renewable energy, solar installation, CCTV systems and home automation.

Full profile

Expertise, experience and education

George Otive Georgia is a Nigerian electrical and electronics engineer, technology innovator, entrepreneur and engineering educator. He founded AUTOTIVE Engineering & Innovations (AEI), a hardware engineering and applied technology company, in 2019 in Ozoro, Delta State.

Electronics and hardware

  • Circuit design, prototyping and testing
  • PCB design and development
  • Analog and digital electronics
  • Troubleshooting and repairs
  • Component selection and integration

Embedded systems

  • Arduino and ATmega328P
  • ESP32 hardware development
  • PIC16F887 and dsPIC30F2010
  • Embedded firmware
  • Sensors and data acquisition
  • Automated monitoring and control

IoT and automation

  • IoT device development
  • Wireless monitoring and remote control
  • IoT telemetry and data communication
  • Smart home and industrial automation
  • RFID identification systems
  • Real time monitoring and control

Renewable energy

  • Solar PV system design
  • Solar sizing and load assessment
  • Inverter design, installation and troubleshooting
  • Lithium ion and LiFePO4 batteries
  • Energy storage systems
  • Battery management and protection
  • Energy monitoring and management

Software and tools

  • Proteus simulation and design
  • Microcontroller programming environments
  • Test and measurement instruments
  • Prototyping and troubleshooting tools

Experience

  • 2019 to presentFounder and CEO, AUTOTIVE Engineering & InnovationsOzoro, Delta State. A hardware engineering and applied technology company that designs, develops and deploys practical engineering solutions.
    • Leads hardware and embedded systems design.
    • Develops renewable energy and lithium storage solutions.
    • Leads IoT, smart automation and energy management projects.
    • Takes projects from concept to prototype, testing and deployment.
    • Coordinates training and mentorship programs.
    • Guides students and supports undergraduate projects.
    • Manages product development, operations and business development.
  • Nov 2025 to presentTechnologist II, Southern Delta UniversityDepartment of Electronics and Telecommunications Engineering. Laboratory support, practical engineering activities, equipment handling, student support and project development.

Education

  • 2026B.Eng, Electrical and Electronics EngineeringSouthern Delta University, Ozoro. Second Class Upper Division.
  • 2022HND, Electronics and Telecommunications EngineeringDelta State Polytechnic, Ozoro. Upper Credit.
  • 2019OND, Electrical and Electronics Engineering TechnologyDelta State Polytechnic, Ozoro. Upper Credit.

Research

  • Author of a peer reviewed publication in Smart Energy Systems.
  • Applied research in electronics and energy technology.
  • Research and development in embedded systems, energy monitoring and renewable energy.
  • Undergraduate project guidance, knowledge transfer and student mentorship.

Professional interests

  • Renewable energy and storage
  • Smart energy management
  • Embedded systems
  • IoT and automation
  • Electronic product design
  • Local manufacturing
  • Applied engineering research
  • Engineering education
  • Youth development
  • Technology entrepreneurship
Young Africans should not only learn how technology works. They should be able to design, build and sell their own solutions.

Vision

Through AEI, George works toward local technology, renewable energy adoption, hardware manufacturing and practical engineering education across Africa.

George Otive Georgia